Design Specs
Design Specifications for Implant
Nerve cuff diameter: 1-1.5 mm
Bioresorbable layers: 9.9 +/- 0.9 nm
Bioresorbable device viability: 90 days
Weight: 10 grams
Electrical stimulation frequency: 14kHz-26kHz
Output voltage: 50-150 mV
Wireless communication range via passive powering: 4 cm away
Wireless Communication Protocol: Passive Power
Wireless power range: 4 cm away
Biocompatibility: Must be biocompatible
Power source: Passive
Implant Safety: On/off mechanism
Implant Cost: Less than $200
Sufficient Power: 0.5 - 200 mW
Time to Completion: 6 Months
Safe Current Density: 1 - 10 mA
HFAC block: Block necessary
Adjustable size: Size should be adjustable
Design Specifications for Controller
Size: 13x18x5 cm
Weight: 200 grams
Power source: Rechargeable
Biocompatibility: Does not need to be biocompatible
Transmission Voltage: 150 - 250 mV
Transmission Duration: 100 - 300 𝝻S
Charge period: Minimum 1 week
Recharge duration: Maximum 3 hours
Controller cost: Less than $200
Compatibility with Hardware: 100% compatibility required
Security: 100% secure
Energy Consumption: less than 6 W
Rechargeability Convenience: Device should not require the patient to spend
excessive time recharging it
Sufficient output: 7-12 V
Time to Completion: 6 months
Compatibility with Battery: 100% compatible
Accessibility: Accessible for all patients - is not prohibitively expensive and does not depend on smartphone ownership
Nerve cuff diameter: 1-1.5 mm
Bioresorbable layers: 9.9 +/- 0.9 nm
Bioresorbable device viability: 90 days
Weight: 10 grams
Electrical stimulation frequency: 14kHz-26kHz
Output voltage: 50-150 mV
Wireless communication range via passive powering: 4 cm away
Wireless Communication Protocol: Passive Power
Wireless power range: 4 cm away
Biocompatibility: Must be biocompatible
Power source: Passive
Implant Safety: On/off mechanism
Implant Cost: Less than $200
Sufficient Power: 0.5 - 200 mW
Time to Completion: 6 Months
Safe Current Density: 1 - 10 mA
HFAC block: Block necessary
Adjustable size: Size should be adjustable
Design Specifications for Controller
Size: 13x18x5 cm
Weight: 200 grams
Power source: Rechargeable
Biocompatibility: Does not need to be biocompatible
Transmission Voltage: 150 - 250 mV
Transmission Duration: 100 - 300 𝝻S
Charge period: Minimum 1 week
Recharge duration: Maximum 3 hours
Controller cost: Less than $200
Compatibility with Hardware: 100% compatibility required
Security: 100% secure
Energy Consumption: less than 6 W
Rechargeability Convenience: Device should not require the patient to spend
excessive time recharging it
Sufficient output: 7-12 V
Time to Completion: 6 months
Compatibility with Battery: 100% compatible
Accessibility: Accessible for all patients - is not prohibitively expensive and does not depend on smartphone ownership